autosafe
Reliable in panic situations
The automatic autosafe 833P multipoint locking system is perfect for single and double-leaf emergency exit doors in commercial buildings. In addition, the fire-resistant design for use in fire protection doors is already standard with these locking systems.
What’s more, a motor can be retrofitted at any time for convenient motorised door opening via an access control system.
The product range includes tested and certified solutions for single and double-leaf emergency exit doors according to EN 179 and EN 1125, for all door materials and applications.
The autosafe 833P is part of the FUHR system solutions, which open up many new possibilities for you in terms of application.
Secure and reliable
The main bolt and the two deadlocking latches automatically extend as the door is closed.
Safe escape at any time
The door can be opened effortlessly using the lever handle/panic push bar.
Certified security
Tested and certified according to EN 179 and EN 1125 – for single and double-leaf emergency exit doors.
Features that offer more
Fire-resistant design already standard for use in fire protection doors.
Contactless release principle
The low-wear magnetic release offers manipulation protection and is resistant to dirt.
Robust and long-lasting
The long service life has been tried and tested through tests with over 200,000 operations.
Functions
Locking
Two sturdy deadlocking latches and the main deadbolt automatically extend as the door is closed and all bolts are secured against being pushed back.
For double-leaf versions, a switching lock also automatically locks the rods at the top and bottom when the inactive leaf is closed.
Release
From outside:
Opened with cylinder key for panic function E.
For panic function B, the outside handle is unlocked using the cylinder key which then retracts all locking elements.
From inside:
Lever handle/panic push bar-operated opening.
For the double-leaf versions, this can be set up for both the active and inactive leaf side. For emergency opening of the inactive leaf, the panic keep drive lock rod is retracted and all locking points on the active leaf are slid back at the same time.
Technical data
- Locking type
Type 4 – Automatic deadlocking latch - Faceplate version
- Flat 16, 20 and 24 mm
- U 24x6, 24x6.7 and 30x8 mm
- Surface
FUHR-Silver
FUHR-Silver ground finish
Stainless steel - Panic function
B and E - Fire-resistant design
Standard - Backset
35, 40, 45, 50, 55, 65, 80 mm - Centre
72, 92 mm
- Follower
9 mm, also available for split spindle - Lever handle height
1020, 1050 mm and 850 mm according to DIN 18040 – Barrier-free construction - Cylinder
Designed for profile cylinders or round cylinders, no free-movement cylinders required - Door opening direction
Panic function E can be used on right or left - Burglar resistance
Up to RC3 in suitable door systems
Optional versions
Controlled latch locking
Offers the option to retract and secure all locking elements using the cylinder key for panic function E.
Not permissible for fire and smoke protection doors.
Kindergarten solution
autosafe 833P-KiGa automatic multipoint locking system with panic function and double lever handle, for alarm-secured opening via the bottom lever handle or panic push bar.
Status monitoring
autosafe 833PK with switching contacts for monitoring operation of the bolt and door handle or profile cylinder. For use in e.g. burglar alarm systems, emergency exit security systems or building management systems. Available for panic function E.
Frame components
We also offer a wide range of profile and material-specific one-piece strike plates and individual strike plates for all door requirements to go with our locking systems. There is also an extensive selection of accessories and inactive leaf fittings for double-leaf emergency exit doors.
Certificates and tests
Our in-house tests and regular checks by reputable independent test institutes both in Germany and abroad ensure that we keep to our high quality standards.
- Tested according to EN V 15685
- Certified according to EN 179 for single and double-leaf emergency exit doors
- Certified according to EN 1125 for single and double-leaf panic doors
- VdS approval class A
- Suitable for system tests according to DIN EN 1627 et seqq. up to RC3
- Suitable for system tests according to DIN EN 1634-1
- Tested according to BRL 3104 up to SKG**
Aluminium/steel doors
- Locking type
Type 4 – Automatic deadlocking latch - Faceplate version
- Flat 24 mm
2170 mm – Standard
2400 mm – High - U 24x6 und 24x6.7 mm
1790 mm – Standard
1990 mm – High
- Flat 24 mm
- Surface
Stainless steel ground finish - Backset
35, 40, 45, 55 mm
- Centre
92 mm - Follower
9 mm, also available for split spindle - Screw hole
Countersink for standard window installation screw 4.2 mm or FUHR special self-tapping screw M5 with small countersunk head
- Double-leaf emergency exit doors
Panic inactive leaf sets
Find out more
Timber doors
- Locking type
Type 4 – Automatic deadlocking latch - Faceplate version
- Flat 20 mm rounded
1800 mm – Standard
2000 mm – High - Flat 20 mm and U30x8 mm
2170 mm – Standard
2400 mm – High
- Flat 20 mm rounded
- Surface
FUHR-Silver ground finish
Stainless steel ground finish on request
- Backset
45, 50, 55, 65, 80 mm - Centre
92 mm - Follower
9 mm, also available for split spindle - Lever handle height
1050 mm
- Double-leaf emergency exit doors
Panic inactive leaf sets
Find out more
uPVC doors
- Locking type
Type 4 – Automatic deadlocking latch - Faceplate version
- Flat 16, 20, 24 mm
2170 mm – Standard
2400 mm – High - U 24x6 mm
1790 mm – Standard
1990 mm – High
- Flat 16, 20, 24 mm
- Surface
FUHR-Silver
- Backset
35, 40, 45, 50, 55 mm - Centre
92 mm - Follower
9 mm, also available for split spindle
- Double-leaf emergency exit doors
Panic inactive leaf sets
Find out more
Functional doors
Solid-leaf timber or steel doors
- Locking type
Type 4 – Automatic deadlocking latch - Faceplate version
- Flat 20 mm rounded
1800 mm – Standard
2000 mm – High - U 24x6 mm
1790 mm – Standard
1990 mm – High
- Flat 20 mm rounded
- Surface
Stainless steel ground finish
- Backset
65, 80 mm - Centre
72 mm - Follower
9 mm, also available for split spindle
- Double-leaf emergency exit doors
Panic inactive leaf sets
Find out more
Apartment entrance doors
- Locking type
Type 4 – Automatic deadlocking latch - Faceplate version
Flat 20 x 1700 mm rounded - Surface
FUHR-Silver ground finish
- Backset
55, 65, 80 mm - Centre
72 mm - Follower
9 mm, also available for split spindle
Downloads
We’re happy to help.
Our experts are always on standby with tips and advice to make sure no questions go unanswered.
Questions? We’re happy to help.
Our support team is happy to answer any questions you may have about our products and provides you with sources of supply.
Looking for a professional? Look no further.
Find the personal contact and specialist partners for your region here.