multisafe
High locking power and easy to use
The lever-operated multisafe 859 is easy to use and guarantees high locking convenience. It is suitable for both main and side/back entrance doors.
The secondary locking points are extended by simply pushing the lever handle up, providing security while ensuring long-lasting door seal tightness. Even more security: When opening the door from outside, the latch can only be retracted using the cylinder key.
The multisafe 859 is part of the FUHR system solutions, which open up many new possibilities for you in terms of application.
Flexibility in use
The modular design allows for flexible use in main and side/back entrance doors.
Increased locking convenience
Simple operation and high locking power using the lever handle.
Security you can always rely on
Robust and long-lasting – tested over at least 200,000 operations.
Efficient upgrades
Reduced storage costs thanks to additional components that can be retrofitted at any time.
Always position-stable
Sturdy handle mount to ensure the lever handle always stays horizontal.
Versatile in use
Can be used on right or left, suitable for doors of all materials.
Functions
Locking
The door is locked by pushing the lever handle up. The main deadbolt is then extended to secure the lock by turning the key.
Release
From outside:
The door is unlocked by retracting the bolt using the cylinder key and releasing the other locking points by pushing the lever handle down. The latch is retracted using the cylinder key.
From inside:
The door is unlocked by retracting the bolt using the cylinder key and releasing the other locking points by pushing the lever handle down. The latch is retracted using the lever handle.
Technical data
- Locking type
- Type 1 – roller cams
- Type 2 – mushroom cams
- Type 3 – hook bolt
- Type 3/1 – hook bolt with roller cams
- Type 8 – round bolt
- Type 11 – hook bolt with dual round bolts
- Designed for access restriction or additional deadbolt lock – Standard and High
- Faceplate version
- Flat 16, 20 and 24 mm
- U24x6 mm and U24x6.7 mm
- Surface
FUHR-Silver
Stainless steel
- Backset
30, 35, 40, 45, 55 mm - Centre
92 mm - Follower
8 mm, split - Lever handle height
1020, 1050 mm - Cylinder
Designed for profile cylinders or round cylinders - Door opening direction
Can be used on right or left - Burglar resistance
Up to RC3 in suitable door systems
Frame components
We also offer a wide range of profile and material-specific one-piece strike plates and individual strike plates for all door requirements to go with our locking systems. There is also an extensive selection of accessories as well as inactive leaf locking systems for reliable inactive leaf locking.
Certificates and tests
Our in-house tests and regular checks by reputable independent test institutes both in Germany and abroad ensure that we keep to our high quality standards.
- Certified according to DIN 18251-3
- Suitable for system tests according to EN 1627 et seqq. up to RC3 (type 3)
- Tested according to BRL 3104 up to SKG***
Aluminium/steel doors
- Locking type
- Type 3 – hook bolt
- Type 8 – round bolt
- Faceplate version
- Flat 24 mm
2170 mm – Standard
2400 mm – High - U 24x6 mm
1790 mm – Standard
1990 mm – High - Designed for access restriction or additional deadbolt lock
- Flat 24 mm
- Surface
Stainless steel ground finish
Standard length also FUHR-Silver - Backset
30, 35, 40, 45 mm - Centre
92 mm - Follower
8 mm, split - Screw hole
Countersink for standard window installation screw 4.2 mm or FUHR special self-tapping screw M5 with small countersunk head
uPVC front doors
- Locking type
- Type 3 – hook bolt
- Type 3/1 – hook bolt with roller cams
- Faceplate version
- Flat 16, 20, 24 mm
2170 mm – Low
2170 mm – Standard
2400 mm – High - U 24x6 mm
1576 mm – Low
1790 mm – Standard
1990 mm – High - Designed for access restriction or additional deadbolt lock – Standard and High
- Flat 16, 20, 24 mm
- Surface
FUHR-Silver - Backset
35, 40, 45, 55 mm - Centre
92 mm - Follower
8 mm, split
Compact range for uPVC front and side/back doors
- Locking type
- Type 1 – roller cams
- Type 3/1 – hook bolt with roller cams
- Type 3 – 2 hook bolts
- Type 3/3 – 4 hook bolts
- Faceplate version
- Flat 16 x 2170 mm
- Designed for access restriction or additional deadbolt lock
- Drive rails with toothing
For flexibility in upgrades
- Surface
FUHR-Silver - Backset
35, 40, 45, 55 mm - Centre
92 mm - Follower
8 mm, split
Downloads
We’re happy to help.
Our experts are always on standby with tips and advice to make sure no questions go unanswered.
Questions? We’re happy to help.
Our support team is happy to answer any questions you may have about our products and provides you with sources of supply.
Looking for a professional? Look no further.
Find the personal contact and specialist partners for your region here.